Logo link to homepage

Salton Buttes

Photo of this volcano
  • Country
  • Volcanic Region
  • Landform | Volc Type
  • Last Known Eruption
  • 33.197°N
  • 115.616°W

  • -40 m
    -131 ft

  • 323200
  • Latitude
  • Longitude

  • Summit
    Elevation

  • Volcano
    Number


Most Recent Bulletin Report: March 2014 (BGVN 39:03) Citation IconCite this Report

Instrument-aided IR detection of 5 steaming vents at Red Island in 2013

A recent partial survey conducted by David K. Lynch and Paul M. Adams of Red Island, previously known as Red Hill, in Southern California, USA, has resulted in the discovery of five steaming hot vents on the SW flank of the northern Salton Buttes volcanic field. Lynch and Adams sent us a report, which follows. We also include some remarks from related literature and note geothermal power plants in the region.

Background. Red Island is part of the Salton Buttes, a collection of five late Quaternary rhyolitic volcanic necks in the Salton Sea Geothermal Field (SSGF) (figure 1). The SSGF rests within a topographic low, and has a geothermal gradient that averages ~0.3°C/m, reaching a maximum of 4.3°C/m (Lynch and others, 2013). This high geothermal gradient results from the shallow magma body of the spreading center between the San Andreas and Imperial faults. As shown in figure 2, the SSGF lies at the head of the Gulf of California, on the boundary of the Pacific and North American plates (Elders and Sass, 1988). Consequently, the SSGF's unique geology creates the perfect setting for hot geothermal fluids to seep to the surface, and has been slated as a site for geothermal electricity-generating plants. There are no previous Bulletin reports on the Salton Buttes.

Figure (see Caption) Figure 1. The Salton Trough is a result of crustal stretching and sinking associated with regional extensional tectonics including the San Andreas Fault (SAF) and the East Pacific Rise (EPR, the spreading center shown at the bottom of the map).This sketch shows the boundary between the Pacific and North American plates, with the rectangle indicating the Salton Trough. The S end of the Salton Trough (as defined by the box) begins adjacent to the Sea of Cortez, the body of water separating the Baja California peninsula from mainland Mexico. The SSGF is within the Salton Trough. Other abbreviations include Gorda Rise, GR; Mendocino Triple Junction, MTJ; and Rivera Triple Junction, RTJ. Taken from Elders and Sass (1988).
Figure (see Caption) Figure 2. Sketch map showing location of Salton Sea and the Salton Buttes volcanic area study area. For scale, the N-S distance from the S end of the Salton Sea to the USA-Mexico border is ~100 km. The lake is receding but its 2014 surface elevation is close to -69 m. Courtesy of Lynch and others (2013).

The Salton Buttes reside near the SE end of the Salton Sea. The Sea resides on the floor of the Salton Trough, chiefly in Imperial County, California. This briny water body is about 56 x 10 km. The Buttes lie along a NNE trending line spanning a distance of 7 km. The Salton Trough was filled, in part, by sediments carried by the Colorado River, which eventually built up and blocked the river's flow. The river was diverted away from the Salton Trough, yet, in 1905, heavy rainfall caused nearby levees to collapse, creating the Salton Sea (Morris, 2008).

Until recent work by Lynch and others (2011) and Schmidt and others (2013), the Salton Buttes were thought to have been formed by extruded magma during the late Pleistocene, ~16,000 BP. Age dates for some lavas are now dated to closer to 2,000 BP, much younger than originally understood, bringing closer scrutiny of the Buttes by the U.S. Geological Survey (USGS) California Volcano Observatory and other agencies concerned with geological threats in California (Lynch and Adams, unpublished draft).

Red Island consists of two conjoined volcanoes of related, yet distinctly different, geology. They are 2.5 km SSW of the Mullet Island fumaroles, an area discussed further by Lynch and others (2013).

Mullet Island fumaroles: As the briny water level of the Salton Sea began dropping in 1983, a number of fumarole fields were exposed subaerially for the first time since 1945. The Salton Sea overlaps the SSGF and, as a result, an interaction of rising gas and hot water with sediments has produced a number of hot, fumarolic gryphons (mud volcanoes) and salses (bubbling water in calderas of gryphons) (Lynch and others, 2013). Over-pressured subsurface gas cause the upward migration of fluidized sediment, creating these gryphons, as seen in figure 3.

Figure (see Caption) Figure 3. View of a steaming spatter cone, one of the first stages of a gryphon's development. Once the rising mud becomes more viscous and covers the spatter cone completely, a composite gryphon is formed. The height of these gryphons can range from a few centimeters to ~2 m. Mullet Island can be seen at the top left of the image. Taken from Lynch and others (2013).

The NW trending alingment of these geothermal features is suggestive of a fault, most likely the Calipatria fault. Other fumarole fields are still below water level or are being exposed as the lake recedes.

Red Island vents. Before the work on Mullet Island fumaroles was published, Michael McKibben, while on a 2008 Desert Symposium field trip (Reynolds and others, 2008), mentioned a 'volcanic hotspot' on the SW flank of the N volcano at Red Island in a private communication to Lynch and Adams. However, a swift search of the area during the field trip did not reveal its location. As a result of this observation, Lynch and Adams performed a partial survey of the SW flank of the N volcano on 6, 7, and 29 November 2013, which resulted in the discovery of the five hot steaming vents on the summit of the south-facing slope. Lynch and Adams found that the vents were distributed along an ~80 m long line trending N65E, which they recognized as a possible fault.

All attempts at identifying vents were made before sunrise, when the air temperature was at its lowest diurnal value (~8°C). This provided a recognizable thermal contrast between cold and hot rocks. Lynch and Adams noted that it was unlikely that warm air coming from the vents could have been felt on a hot or windy day, as the vents appeared unremarkable from a relatively close distance (a few meters), "among the uneven field of loose, jutting volcanic rocks." To locate the vents, Lynch and Adams employed the following three tactics:

1. An Agena ThermoVision 470 infrared camera was used to look for areas that were warmer than the background (e.g., figure 4, lower). Absolute temperatures from the camera may have been off by 3-4°C due to systematic errors, but the image records relative temperatures between different parts of scene. were preserved. The vent seen in figure 4 may have been deliberately covered with a pile of rocks.

2. They reached into holes and crevasses to check for heat.

3. They measured rock temperatures using a Martin P. Jones & Associates, Inc., Model 9910 TE Infrared Thermometer. Because it was small enough to be placed deeper in the vents, the temperatures from this thermometer were higher than the IR camera temperatures.

Figure (see Caption) Figure 4. (Top) Image of a hotspot (designated H3) seen in visible wavelength light. (Bottom) Image of the same spot taken with an Agena ThermoVision 470 IR camera. Yellow patches in the center and lower right of the image indicate bad pixels in the IR camera. Taken from Lynch and Adams (2013).

Lynch and Adams found one vent "by feeling hot air coming from it," one "by noticing wet rock," one "by seeing its steam cloud," and two by locating them with the IR camera. Once located, all vents were found to be steaming (figure 5) and surrounded by rocks wet from condensation.

Figure (see Caption) Figure 5. Steam cloud from H1; still taken from a video of the hotspot at Red Island, Salton Buttes. Taken from Lynch and Adams (2013).

No surface deposits (e.g., sulfur) were seen, aside from water and greenish algae. The temperatures 1-2 m within the vents were 35-38°C. According to Lynch and Adams, these hotspots may "represent heat from original volcanism, or recent magma intrusions that have not reached the surface." The distribution of these vents, distinguished as H1, H2, H3, H4, H5, is shown in figure 6.

Figure (see Caption) Figure 6. Vent locations marked on an image of Red Island, Salton Buttes, from Google Earth. Taken from Lynch and Adams (2013).

The team was relatively confident that no additional vents were located within the area extending 225 m to the S and W, although a more complete survey must be undertaken to investigate seismicity and movement/deformation of the area from GPS networks. However, other "warm spots" not associated with venting or outgassing were found on the SW flank of the N volcano. They were ~5-10°C warmer than ambient temperatures and may represent weak signals from the warm interior of the volcano. More likely, however, the warmer temperatures are due to emissivity variations in rock layers, or normal temperature distributions that occur in crevasses where rocks are not able to radiate heat into the cold night sky.

Geothermal electricity-generating plants. According to the Geothermal Energy Association, currently there are three major geothermal production sites in the Imperial Valley, totaling in 16 plants. Figure 7 shows one of these sites, which hosts seven geothermal plants with running capacities ranging from 5-45 MW (Geothermal Energy Association). Despite the fact that this site alone has contributed enough electricity to power ~100,000 homes, geothermal energy only accounts for 4.4% of all system power in California (Matek and Gawell, 2014). The SSGF is considered the best opportunity for increasing the production of geothermal energy in California. The unique geology of the Salton Sea area allows geothermal fluids to seep to the surface, allowing a range of capacity from 1,700 to 2,900 MW.

Figure (see Caption) Figure 7. This CalEnergy geothermal site is located on the edge of the Salton Sea, and currently has seven running geothermal power plants. Taken from The Center for Land Use Interpretation.

References. Elders, W and Sass, J, 10 November 1988, The Salton Sea Scientific Drilling Project; Journal of Geophysical Research, v. 03, no. B11, pp. 12,953-12,968.

Lynch, D., Hudnut, K., and Adams, P., 2013, Development and growth of recently-exposed fumarole fields near Mullet Island, Imperial County, California; Geomorphology, v. 195, pp. 27-44.

Lynch, D.K., Schmitt, A.K.., Rood, D., and Akciz, S, 2011, Radiometric Dating of the Salton Buttes, Proposal to the Southern California Earthquake Center.

Matek, B., and Gawell, K., February 2014, Report on the State of Geothermal Energy in California; Geothermal Energy Association, 2014.

Morris, R., 2008, Welcome to the Salton Trough, California State University Long Beach Geology.

Reynolds, R., Jefferson, G., Lynch, D., 2008, Trough to Trough: The Colorado River and the Salton Sea, Proceedings of the 2008 Desert Symposium, Robert E. Reynolds (ed.), California State University, Desert Studies Consortium and LSA Associates, Inc.

Schmitt, A, Martin, A, Stockli, D, Farley, K, Lovera, O, 2013, (U-­-Th)/He zircon and archaeological ages for a late prehistoric eruption in the Salton Trough (California, USA), Geology, January 2013, v. 41, pp. 7-10.

Information Contacts: David Lynch, Earthquake Science Center, USGS- Pasadena; Paul Adams, Thule Scientific, Topanga, CA (URL: http://thulescientific.com/Research.html); The Center for Land Use Interpretation, Culver City, CA (URL: http://clui.org/); and Geothermal Energy Association, Washington, D.C. (URL: http://geo-energy.org/).

The Global Volcanism Program has no Weekly Reports available for Salton Buttes.

Bulletin Reports - Index

Reports are organized chronologically and indexed below by Month/Year (Publication Volume:Number), and include a one-line summary. Click on the index link or scroll down to read the reports.

03/2014 (BGVN 39:03) Instrument-aided IR detection of 5 steaming vents at Red Island in 2013




Information is preliminary and subject to change. All times are local (unless otherwise noted)


March 2014 (BGVN 39:03) Citation IconCite this Report

Instrument-aided IR detection of 5 steaming vents at Red Island in 2013

A recent partial survey conducted by David K. Lynch and Paul M. Adams of Red Island, previously known as Red Hill, in Southern California, USA, has resulted in the discovery of five steaming hot vents on the SW flank of the northern Salton Buttes volcanic field. Lynch and Adams sent us a report, which follows. We also include some remarks from related literature and note geothermal power plants in the region.

Background. Red Island is part of the Salton Buttes, a collection of five late Quaternary rhyolitic volcanic necks in the Salton Sea Geothermal Field (SSGF) (figure 1). The SSGF rests within a topographic low, and has a geothermal gradient that averages ~0.3°C/m, reaching a maximum of 4.3°C/m (Lynch and others, 2013). This high geothermal gradient results from the shallow magma body of the spreading center between the San Andreas and Imperial faults. As shown in figure 2, the SSGF lies at the head of the Gulf of California, on the boundary of the Pacific and North American plates (Elders and Sass, 1988). Consequently, the SSGF's unique geology creates the perfect setting for hot geothermal fluids to seep to the surface, and has been slated as a site for geothermal electricity-generating plants. There are no previous Bulletin reports on the Salton Buttes.

Figure (see Caption) Figure 1. The Salton Trough is a result of crustal stretching and sinking associated with regional extensional tectonics including the San Andreas Fault (SAF) and the East Pacific Rise (EPR, the spreading center shown at the bottom of the map).This sketch shows the boundary between the Pacific and North American plates, with the rectangle indicating the Salton Trough. The S end of the Salton Trough (as defined by the box) begins adjacent to the Sea of Cortez, the body of water separating the Baja California peninsula from mainland Mexico. The SSGF is within the Salton Trough. Other abbreviations include Gorda Rise, GR; Mendocino Triple Junction, MTJ; and Rivera Triple Junction, RTJ. Taken from Elders and Sass (1988).
Figure (see Caption) Figure 2. Sketch map showing location of Salton Sea and the Salton Buttes volcanic area study area. For scale, the N-S distance from the S end of the Salton Sea to the USA-Mexico border is ~100 km. The lake is receding but its 2014 surface elevation is close to -69 m. Courtesy of Lynch and others (2013).

The Salton Buttes reside near the SE end of the Salton Sea. The Sea resides on the floor of the Salton Trough, chiefly in Imperial County, California. This briny water body is about 56 x 10 km. The Buttes lie along a NNE trending line spanning a distance of 7 km. The Salton Trough was filled, in part, by sediments carried by the Colorado River, which eventually built up and blocked the river's flow. The river was diverted away from the Salton Trough, yet, in 1905, heavy rainfall caused nearby levees to collapse, creating the Salton Sea (Morris, 2008).

Until recent work by Lynch and others (2011) and Schmidt and others (2013), the Salton Buttes were thought to have been formed by extruded magma during the late Pleistocene, ~16,000 BP. Age dates for some lavas are now dated to closer to 2,000 BP, much younger than originally understood, bringing closer scrutiny of the Buttes by the U.S. Geological Survey (USGS) California Volcano Observatory and other agencies concerned with geological threats in California (Lynch and Adams, unpublished draft).

Red Island consists of two conjoined volcanoes of related, yet distinctly different, geology. They are 2.5 km SSW of the Mullet Island fumaroles, an area discussed further by Lynch and others (2013).

Mullet Island fumaroles: As the briny water level of the Salton Sea began dropping in 1983, a number of fumarole fields were exposed subaerially for the first time since 1945. The Salton Sea overlaps the SSGF and, as a result, an interaction of rising gas and hot water with sediments has produced a number of hot, fumarolic gryphons (mud volcanoes) and salses (bubbling water in calderas of gryphons) (Lynch and others, 2013). Over-pressured subsurface gas cause the upward migration of fluidized sediment, creating these gryphons, as seen in figure 3.

Figure (see Caption) Figure 3. View of a steaming spatter cone, one of the first stages of a gryphon's development. Once the rising mud becomes more viscous and covers the spatter cone completely, a composite gryphon is formed. The height of these gryphons can range from a few centimeters to ~2 m. Mullet Island can be seen at the top left of the image. Taken from Lynch and others (2013).

The NW trending alingment of these geothermal features is suggestive of a fault, most likely the Calipatria fault. Other fumarole fields are still below water level or are being exposed as the lake recedes.

Red Island vents. Before the work on Mullet Island fumaroles was published, Michael McKibben, while on a 2008 Desert Symposium field trip (Reynolds and others, 2008), mentioned a 'volcanic hotspot' on the SW flank of the N volcano at Red Island in a private communication to Lynch and Adams. However, a swift search of the area during the field trip did not reveal its location. As a result of this observation, Lynch and Adams performed a partial survey of the SW flank of the N volcano on 6, 7, and 29 November 2013, which resulted in the discovery of the five hot steaming vents on the summit of the south-facing slope. Lynch and Adams found that the vents were distributed along an ~80 m long line trending N65E, which they recognized as a possible fault.

All attempts at identifying vents were made before sunrise, when the air temperature was at its lowest diurnal value (~8°C). This provided a recognizable thermal contrast between cold and hot rocks. Lynch and Adams noted that it was unlikely that warm air coming from the vents could have been felt on a hot or windy day, as the vents appeared unremarkable from a relatively close distance (a few meters), "among the uneven field of loose, jutting volcanic rocks." To locate the vents, Lynch and Adams employed the following three tactics:

1. An Agena ThermoVision 470 infrared camera was used to look for areas that were warmer than the background (e.g., figure 4, lower). Absolute temperatures from the camera may have been off by 3-4°C due to systematic errors, but the image records relative temperatures between different parts of scene. were preserved. The vent seen in figure 4 may have been deliberately covered with a pile of rocks.

2. They reached into holes and crevasses to check for heat.

3. They measured rock temperatures using a Martin P. Jones & Associates, Inc., Model 9910 TE Infrared Thermometer. Because it was small enough to be placed deeper in the vents, the temperatures from this thermometer were higher than the IR camera temperatures.

Figure (see Caption) Figure 4. (Top) Image of a hotspot (designated H3) seen in visible wavelength light. (Bottom) Image of the same spot taken with an Agena ThermoVision 470 IR camera. Yellow patches in the center and lower right of the image indicate bad pixels in the IR camera. Taken from Lynch and Adams (2013).

Lynch and Adams found one vent "by feeling hot air coming from it," one "by noticing wet rock," one "by seeing its steam cloud," and two by locating them with the IR camera. Once located, all vents were found to be steaming (figure 5) and surrounded by rocks wet from condensation.

Figure (see Caption) Figure 5. Steam cloud from H1; still taken from a video of the hotspot at Red Island, Salton Buttes. Taken from Lynch and Adams (2013).

No surface deposits (e.g., sulfur) were seen, aside from water and greenish algae. The temperatures 1-2 m within the vents were 35-38°C. According to Lynch and Adams, these hotspots may "represent heat from original volcanism, or recent magma intrusions that have not reached the surface." The distribution of these vents, distinguished as H1, H2, H3, H4, H5, is shown in figure 6.

Figure (see Caption) Figure 6. Vent locations marked on an image of Red Island, Salton Buttes, from Google Earth. Taken from Lynch and Adams (2013).

The team was relatively confident that no additional vents were located within the area extending 225 m to the S and W, although a more complete survey must be undertaken to investigate seismicity and movement/deformation of the area from GPS networks. However, other "warm spots" not associated with venting or outgassing were found on the SW flank of the N volcano. They were ~5-10°C warmer than ambient temperatures and may represent weak signals from the warm interior of the volcano. More likely, however, the warmer temperatures are due to emissivity variations in rock layers, or normal temperature distributions that occur in crevasses where rocks are not able to radiate heat into the cold night sky.

Geothermal electricity-generating plants. According to the Geothermal Energy Association, currently there are three major geothermal production sites in the Imperial Valley, totaling in 16 plants. Figure 7 shows one of these sites, which hosts seven geothermal plants with running capacities ranging from 5-45 MW (Geothermal Energy Association). Despite the fact that this site alone has contributed enough electricity to power ~100,000 homes, geothermal energy only accounts for 4.4% of all system power in California (Matek and Gawell, 2014). The SSGF is considered the best opportunity for increasing the production of geothermal energy in California. The unique geology of the Salton Sea area allows geothermal fluids to seep to the surface, allowing a range of capacity from 1,700 to 2,900 MW.

Figure (see Caption) Figure 7. This CalEnergy geothermal site is located on the edge of the Salton Sea, and currently has seven running geothermal power plants. Taken from The Center for Land Use Interpretation.

References. Elders, W and Sass, J, 10 November 1988, The Salton Sea Scientific Drilling Project; Journal of Geophysical Research, v. 03, no. B11, pp. 12,953-12,968.

Lynch, D., Hudnut, K., and Adams, P., 2013, Development and growth of recently-exposed fumarole fields near Mullet Island, Imperial County, California; Geomorphology, v. 195, pp. 27-44.

Lynch, D.K., Schmitt, A.K.., Rood, D., and Akciz, S, 2011, Radiometric Dating of the Salton Buttes, Proposal to the Southern California Earthquake Center.

Matek, B., and Gawell, K., February 2014, Report on the State of Geothermal Energy in California; Geothermal Energy Association, 2014.

Morris, R., 2008, Welcome to the Salton Trough, California State University Long Beach Geology.

Reynolds, R., Jefferson, G., Lynch, D., 2008, Trough to Trough: The Colorado River and the Salton Sea, Proceedings of the 2008 Desert Symposium, Robert E. Reynolds (ed.), California State University, Desert Studies Consortium and LSA Associates, Inc.

Schmitt, A, Martin, A, Stockli, D, Farley, K, Lovera, O, 2013, (U-­-Th)/He zircon and archaeological ages for a late prehistoric eruption in the Salton Trough (California, USA), Geology, January 2013, v. 41, pp. 7-10.

Information Contacts: David Lynch, Earthquake Science Center, USGS- Pasadena; Paul Adams, Thule Scientific, Topanga, CA (URL: http://thulescientific.com/Research.html); The Center for Land Use Interpretation, Culver City, CA (URL: http://clui.org/); and Geothermal Energy Association, Washington, D.C. (URL: http://geo-energy.org/).

This compilation of synonyms and subsidiary features may not be comprehensive. Features are organized into four major categories: Cones, Craters, Domes, and Thermal Features. Synonyms of features appear indented below the primary name. In some cases additional feature type, elevation, or location details are provided.

Eruptive History

There is data available for 3 confirmed Holocene eruptive periods.

0210 ± 100 years Confirmed Eruption  

Episode 1 | Eruption Rock Hill, N & S Red Hill
0210 ± 100 years - Unknown Evidence from Correlation: Magnetism

List of 3 Events for Episode 1 at Rock Hill, N & S Red Hill

Start Date End Date Event Type Event Remarks
   - - - -    - - - - Explosion
   - - - -    - - - - Lava dome
   - - - -    - - - - Pumice

0010 ± 100 years Confirmed Eruption  

Episode 1 | Eruption Obsidian Butte
0010 ± 100 years - Unknown Evidence from Correlation: Magnetism

List of 5 Events for Episode 1 at Obsidian Butte

Start Date End Date Event Type Event Remarks
   - - - -    - - - - Explosion
   - - - -    - - - - Lava dome
   - - - -    - - - - Lava spine
   - - - -    - - - - Ash
   - - - -    - - - - Pumice

0290 BCE ± 100 years Confirmed Eruption  

Episode 1 | Eruption Mullet Island
0290 BCE ± 100 years - Unknown Evidence from Correlation: Magnetism

List of 3 Events for Episode 1 at Mullet Island

Start Date End Date Event Type Event Remarks
   - - - -    - - - - Explosion
   - - - -    - - - - Lava dome
   - - - -    - - - - Tephra
Deformation History

There is data available for 2 deformation periods. Expand each entry for additional details.


Deformation during 2006 - 2010 [Subsidence; Observed by InSAR]

Start Date: 2006 Stop Date: 2010 Direction: Subsidence Method: InSAR
Magnitude: Unknown Spatial Extent: Unknown Latitude: Unknown Longitude: Unknown

Remarks: Localized subsidence at Obsidian Butte

Figure (see Caption)

(a) Interseismic deformation of the SAF derived from integrating the GPS observations with ALOS radar interferograms (2006.5?2010). The radar flying direction and look direction are marked in Figure 1. Positive velocities (reds) show the ground moving away from the satellite. The shading high- lights the gradient in the velocity field. The areas with low coherence and large standard deviation (>6mm/yr) are masked. GPS sites are shown as triangles. (b) Southern part of the SAFS shows the broad transition in velocity across San Andreas and San Jacinto.

From: Tong et al. 2013.


Reference List: Tong et al. 2013.

Full References:

Tong, X., D. T. Sandwell, and B. Smith-Konter, 2013. High-resolution interseismic velocity data along the San Andreas Fault from GPS and InSAR. J. Geophys. Res., 118. https://doi.org/10.1029/2012JB009442

Deformation during 2005 Aug 21 - 2005 Sep 25 [Variable (uplift / subsidence); Observed by InSAR]

Start Date: 2005 Aug 21 Stop Date: 2005 Sep 25 Direction: Variable (uplift / subsidence) Method: InSAR
Magnitude: Unknown Spatial Extent: Unknown Latitude: Unknown Longitude: Unknown

Remarks: Seismic and aseismic deformation related to the 2005 Obsidian Buttes seismic swarm

Figure (see Caption)

Interferogram phase (color) and amplitude (intensity) spanning 21 August 2005 to 25 September 2005. Gray regions indicate poor interferogram coherence. Rectangles indicate profile (white) and fault plane (black) used in Figure 7. Signals in upper right of image are likely due to atmospheric water vapor variations that vary over these longer spatial length scales.

From: Lohman and McGuire 2007.


Reference List: Lohman and McGuire 2007.

Full References:

Lohman, R. B. and J. J. McGuire, 2007. Earthquake swarms driven by aseismic creep in the Salton Trough, California. J. Geophys. Res., 112, B04405. https://doi.org/10.1029/2006JB004596

Emission History

There is no Emissions History data available for Salton Buttes.

GVP Map Holdings

Maps are not currently available due to technical issues.

The maps shown below have been scanned from the GVP map archives and include the volcano on this page. Clicking on the small images will load the full 300 dpi map. Very small-scale maps (such as world maps) are not included.

Smithsonian Sample Collections Database

The following 6 samples associated with this volcano can be found in the Smithsonian's NMNH Department of Mineral Sciences collections, and may be availble for research (contact the Rock and Ore Collections Manager). Catalog number links will open a window with more information.

Catalog Number Sample Description Lava Source Collection Date
NMNH 117460-118 Obsidian Obsidian Butte --
NMNH 117460-119 Perlite Obsidian Butte --
NMNH 117460-120 Obsidian Obsidian Butte --
NMNH 117460-121 Obsidian Obsidian Butte --
NMNH 117460-122 Pumice Obsidian Butte --
NMNH 117460-123 Obsidian Obsidian Butte --
External Sites